john/PO-12 Guide

po-12.txt · 16 KiB · Text Raw

_____                                
|_   _|__  ___ _ __   __ _  __ _  ___ 
  | |/ _ \/ _ \ '_ \ / _` |/ _` |/ _ \
  | |  __/  __/ | | | (_| | (_| |  __/
  |_|\___|\___|_| |_|\__,_|\__, |\___|
                           |___/      
 _____             _                      _             
| ____|_ __   __ _(_)_ __   ___  ___ _ __(_)_ __   __ _ 
|  _| | '_ \ / _` | | '_ \ / _ \/ _ \ '__| | '_ \ / _` |
| |___| | | | (_| | | | | |  __/  __/ |  | | | | | (_| |
|_____|_| |_|\__, |_|_| |_|\___|\___|_|  |_|_| |_|\__, |
             |___/                                |___/ 
 ____   ___        _ ____  
|  _ \ / _ \      / |___ \ 
| |_) | | | |_____| | __) |
|  __/| |_| |_____| |/ __/ 
|_|    \___/      |_|_____|
                           
    - the worlds smallest drum computer -

o==========o
| CONTENTS |
o==========o

SUMMARY

PART A. GENERAL
        1. The screen
        2. Knobs and buttons
        3. Table of sounds and effects
        4. Auto power off (APO)
        5. Battery status
        6. Volume
        7. Factory reset

PART B. OPERATION
        1. Getting started
           a. Set clock
           b. Set alarm
        2. Play
           a. Try sounds out
           b. Select pattern 
           c. Press "Play"
        3. Step recording
           a. Optionally: clear pattern
           b. Select a sound
           c. Set sound parameters
           d. Create the sequence
           e. Change parameters afterwards
        4. Live recording
           a. Quantizer
           b. Step multiplier (flam)
        5. Tweak the sound
           a. Effects
           b. Parameter locking (motion recording)
           c. Swing and tempo (BPM)
        6. Making a song
           a. Copy pattern
           b. Clear pattern
           c. Chain patterns to a song

PART C. SYNC

PART D. TIPS, HINTS QUIRKS AND BUGS

o=========o
| SUMMARY | 
o=========o

1. Clear pattern: Function + Pattern.

2. Press Write.

3. Choose instrument: Sound + number.

4. Parameters: set sample speed (A) and LP filter (B).

5. Set sequence for instrument 1.

6. Set parameters differently and program rest of sequence for instrument 1.

7. Motion recording: select instrument and press play. Hold write and turn A or B (this is handy for "synth" sounds 15 and 16).

8. Flam: select an instrument and while playing press and hold a number (to select a step). Press "BPM" to insert the flam.

9. Effect: while playing hold FX and press a number. Use distortion (nr. 2) for snappy snare drum.

10. Song mode: press and hold Pattern and select patterns.

o=================o
| PART A. GENERAL |
o=================o

Clear a pattern: press "Function" + "Pattern".

A-1 The screen
~~~~~~~~~~~~~~
The screen displays the following in its own quirky way:
 
- Selected tempo (numerical, upper right): AM/PM flickers in the beat when sync'ed
- Time (= clock & alarm)/node/additional info (also upper right)
- Sound parameters A and B (in the form of two spools, right hand side)
- Sync: icon of a needle on the left hand side
- Play/rec mode: [>] indicates play;  [o] indicates write mode is active
- The pattern (or: sequence) currently playing is the pattern that the sewing machine currently
  sews. The 16 different patterns are indicated graphically as follows (or simply keep the Pattern 
  button pressed to see its number light up):

1. /\/\/\/\/\/\/\          2. /  /  /  /  /
     \/\/\/\/\/\/\/              /  /  /  /
                                                   
  3. /_|/_|/_|/_|/_|         4. __ __ __ __ __
                                \/ \/ \/ \/ \/
                                ¯¯ ¯¯ ¯¯ ¯¯ ¯¯  
  5. etc.

- When a pattern repeats a "wave" goes through the pattern. 
- When the sequencer changes from one pattern to another then the spool of the sewing machine moves from left to right and a different pattern is displayed afterwards.
- The drummer. A rough indication as to which instrument's step is played is given by the drummer. For instance: he stomps on a pedal when the kick drum is played. A hand clap indicated the clap or the sticks. When he hits the pot on the ground a low or high tom is played. Hi-hats are indicated by him rining the bell. Notice that the light of a sound played also light up when a pattern is played.
- Sound & sound parameters. When one keeps the Sound button pressed (shortly) the currently selected sound (for instance sound number 2 for the snare drum) is indicated in the numerical part of the screen (upper right corner). It shows a one and a dash followed by the number of the sound (for instance: 1-02 for the snare). Keep "Sound" pressed and press the number of a sound to change instrument. The parameters A & B set for that sound/instrument are represented by the thread spools above the A & B knobs.
- The icon of the button w/ four holes: if it lights up then the step played has flam (step multiplier) activated on it. See B-4b. 
- Spark of the needle. When an effect (FX) has been applied to a step in a sequence that is playing then the needle sparks.
- The dashes at the bottom are constantly on (possible bug, see part D).
- The numbers 2, 4, 8 16 next tot the icon of a button w/ four holes (on the left hand side) never show. Possible bug, see part D.

A-2 Knobs and buttons
~~~~~~~~~~~~~~~~~~~~~
- Sound (hold and press 1-16)
- Pattern (hold and press 1-16)
- BPM (press to select tempo w/ knob B, hold to set master volume 1-16, hold 
  step 1-16 + M to set multiplier)
- Knobs A/B
- Function
- FX (hold and press 1-16)
- Play (/stop)
- Write

A-3 Table of sounds and effects
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While playing, hold "FX" and press any key 1-16 to punch-in effects.

Table 1. Instruments sounds and effects.
   ____________________________________________
  
                   Sounds
   ____________________________________________
   1. bass drum                9. hand clap
   2. snare drum              10. click 
   3. closed hi-hat           11. low tom 
   4. open hi-hat             12. hi tom 
   5. synthesized snare       13. cow bell
   6. sticks                  14. blip
   7. cymbal                  15. tone  
   8. noise                   16. bass tone
   _____________________________________________

Effects                      
   _____________________________________________
   1. low sample rate          9. stutter 4  
   2. distortion              10. stutter 3 
   3. bit crush               11. repeat 8 
   4. delay (echo)            12. repeat 6 
   5. lowpass filter          13. note shuffle 
   6. lowpass sweep           14. feedback  
   7. hipass filter           15. parameter lfo 
   8. hipass sweep            16. vibrato
   _____________________________________________

Interesting effects: 1 (low sample r.) and 2 (distortion, for snare dr.). The echo/delay (nr. 4) is a bit too much.

A-4 Auto power off (APO)
~~~~~~~~~~~~~~~~~~~~~~~~
The unit auto powers off after 5 minutes of inactivity. In this state all patterns and settings will be saved, leaving only the LCD lit (lights go off). This state draws very little power so there is no need to remove batteries. If there is a cable connected in the line in, the unit will auto power off after 60 minutes of inactivity. Press any key to wake the unit after sleep (lights go on).

After going into standby mode settings/sequences etc. are permanently stored. Even when batteries are changed!

A-5 Battery status
~~~~~~~~~~~~~~~~~~
Press sound + BPM to show battery status. Its in the numerical part of the display.

A-6 Volume
~~~~~~~~~~
Hold "BPM" and press any key 1-16 to adjust master volume. Note: if a headphone or speaker is connected to the PO-12 then its volume is set down to 5. When the headphone jack is removed then the volume is set back to its high value.

A-7 Factory reset
~~~~~~~~~~~~~~~~~
Hold Pattern + Write while inserting batteries to restore the unit to factory default. Note: If you have an older software revision this reset functionality is not implemented.

A-8 Knobs A & B
~~~~~~~~~~~~~~~
It seems that knob A determines how fast the sample of an instrument is played back and that B is a low pass filter. So a long low bass drum (long decay) can be achieved by turning A up (but not too much) and turning B down. A snappy high snare drum is more difficult. The sample may not be too short but when it is long that means that the sample is played back slowly, and thus, not snappy. Filter all the way up.

o===================o
| PART B. OPERATION |
o===================o

B-1 Getting started
~~~~~~~~~~~~~~~~~~~~
a. Set clock
Insert batteries. Set time by turning knob A for hours and knob B for minutes. press any key to confirm and exit. Reset the clock by removing the batteries and start over.

b. Set alarm
Press Sound + Pattern. Set alarm clock by turning A for hours and B for minutes. (disable alarm by turning knob A all the way down). Press key 1-16 to set pattern for the alarm.

B-2 Play 
~~~~~~~~
a. Try sounds out 
When neither the play or rec mode is selected (see LCD screen) one can push buttons 1 to 16 to hear its sound. The parameters of the sound can be altered by turning knobs A and B. Beware: when one pushes the button of a sound multiple times quickly then the parameters of the sound are (re)set to those seen on the display (i.e. the two spools).

b. Select pattern 
Hold the Pattern button and press any key from 1-16 to select a pattern. Blinking led indicates active pattern

c. Press "Play"
Press play to start playing, press again to stop. Watch the 16 step sequencer move from step to step (the steps light up). The button number of the sound played blinks for a short time too.

B-3 Step recording
~~~~~~~~~~~~~~~~~~
To choose a pattern: press "Pattern" + number.

a. Optionally: clear pattern
Press "Function" + "Pattern".

b. Select a sound
Hold the Sound button and press a key from 1-16.

c. Set sound parameters
Before entering a note into the sequencer one may alter the sound w/ knobs A & B. The values for parameter A & B which are set for that instrument are represented by the thread spools above the A & B knobs. They are saved into memory along w/ the sequence. For the bass drum parameter A sounds like pitch and B like decay (compare to a Roland TR-808).

d. Create the sequence
Press "Write" (the rec symbol will be shown on the LCD screen). Enter sounds/notes in the grid of the sequencer. Press "Sound + number" to select another instrument. Press play to listen to your pattern. The sequence is automatically saved when the PO-12 is not operated for 5 minutes (and goes in to standby mode).

e. Change parameters afterwards
To change an instrument's parameters, activate the instrument (press Sound + instrument number) turn knobs A & B and re-enter the sequence for that instrument (see also B-5b Parameter locking).

B-4 Live recording
~~~~~~~~~~~~~~~~~~
a. Quantizer 
While playing, hold "Write" and press any key 1-16 to punch in notes. Notes will be quantized along with current swing setting. release write when finished. Beware! All parameters (i.e knob A & B) that you've set during step recording are reset.

b. Flam (step multiplier)
- Select a sound (i.e. instrument) w/ "Sound" + number key. 
- While playing, press and hold a number key to select a step. 
- Press "BPM/M" to insert a re-trig (flam) on that step. 
- Press "BPM/M" multiple times to switch between 2, 4, 8, 16 or 0 flams (four times).

When flam is active the icon of a button w/ four holes on the left side blinks  when the "flammed" step is played. Probably the number of flams should have had to appear next to the button icon (the numbers 2, 4, 8, and 16 are there), but has been forgotten to be implemented during development (also see part D). It is now very difficult to see how many times you should press "BPM" to get rid of the flam, if you can even find out on which instrument it has been activated and on which step. So use w/ care!

B-5 Tweak the sound
~~~~~~~~~~~~~~~~~~~
a. Effects
- See table 1 in section A-3. While playing, press and hold the number key of the desired effect. Then press FX to punch-in the effect. If an effect is applied to a certain step in the sequence then the needle of the sewing machine sparks. You cannot see what effect was applied. You can apply more that one effect on one step.
- If an effect is applied on a two steps in a row then the left spark shows first and then the right. If an effect is only applied to an isolated step then only the left spark shows.
- Hold FX without pressing any key to clear effects. You can clear all effects on all steps or all effects that were applied on one step (time carefully!). You can not clear one effect: only all.  
- If you deactivate a step then the effect is not deactivated.

b. Parameter locking (motion recording)
- Select an instrument (Sound + number) and press play. 
- Hold write while turning knob A or B to write sound parameter changes over time.
- Does this only affect the selected instrument?

c. Swing and tempo (BPM)
Hold "BPM" and turn A to adjust the swing or B to adjust the tempo (BPM). The amount of BPM is shown in the numerical part of he display in the upper right hand corner.

B-6 Making a song
~~~~~~~~~~~~~~~~~
a. Copy pattern
Hold "Write" + "Pattern" and press 1-16 to paste the active pattern to the corresponding new slot.

b. Clear pattern
If needed: press Function + Pattern.

c. Chain patterns to a song
Press and hold "Pattern" and select which patterns (1 - 16) to chain by pressing its corresponding number. Up to 16 patterns can be chained. A pattern can be selected multiple times. Example: 1,1,1,4 plays pattern 1 three times then moves on to pattern 4. After last pattern is played the sequence will start over again. A song is not saved. Check the patterns to be played (and thus if you are in song mode) by holding down Pattern. That will make the patterns in a song light up and the first one blinks.

o==============o
| PART C. SYNC |  
o==============o

When the PO-12 is synched with another machine then the icon of a needle is shown on the left hand side of the display.

Table 2. Sync modes.
   _________________________________________
   ID         Input            Output
   _________________________________________
   SY0        stereo           stereo
   SY1        stereo           mono/sync
   SY2        sync             stereo
   SY3        sync             mono/sync
   SY4        mono/sync        stereo
   SY5        mono/sync        mono/sync
   _________________________________________

It is possible to sync the OP-12 with a click track using line in and out. Warning: sync levels should not exceed 5 Vpp (Volt peak-to-peak). Connect a standard stereo audio cable between the units. The master unit will control the tempo of the slave unit.

Hold Function and press BPM on to toggle between sync modes. Press repeatedly to toggle between different modes. There are 5 sync modes. Default mode is SY0. When sync is used the signal will be split between audio (right) and sync (left).

To sync a synth and the OP-12 choose mode SY2. This is not saved: one must press "Function" + "BPM" every time when the PO-12 is synced.

o=====================================o
| PART D. TIPS, HINTS QUIRKS AND BUGS |
o=====================================o

D-1. Want to see the parameters (A & B) that you've set for a particular instrument in a sequence? Select that sound ("Sound" + number) and it is displayed on the thread spools A & B during play.

D-2. The numbers 2, 4 ,8 and 16 next to the flam indicator (i.e. the step multiplier: the icon of a button w/ four holes) do never show AFAIK. Considering the fact that flam can take the value of those numbers it might have been an error during the development of the device, that is: they should have shown up in combination w/ flam.

D-3. Some units show the number of flams (i.e. step multiplier) in the clock section of the screen when flam is applied. What is shown is "t-2", "t-4", etc. Mine does not show this. Different firmwares?

D-4. On the bottom of the LCD display there are 16 dashes. Considering the fact that 16 sequences can be chained to form a song those dashes might have been meant to indicate the position of a selected pattern in a song. It might have have been the intention to have them lit up when the Pattern button is pressed in song mode. Currently only the pattern number of the song that is currently playing blinks. Possibly another error during development of the device.

D-5. If battery power is low (95% - 80%) then the PO-12 crashes if the volume is set high. However, the PO-12 is quite sturdy: I've dropped it from small hights without it resetting.

1	_____
2	\|_ _\|__ ___ _ __ __ _ __ _ ___
3	\| \|/ _ \/ _ \ '_ \ / _` \|/ _` \|/ _ \
4	\| \| __/ __/ \| \| \| (_\| \| (_\| \| __/
5	\|_\|\___\|\___\|_\| \|_\|\__,_\|\__, \|\___\|
6	\|___/
7	_____ _ _
8	\| ____\|_ __ __ _(_)_ __ ___ ___ _ __(_)_ __ __ _
9	\| _\| \| '_ \ / _` \| \| '_ \ / _ \/ _ \ '__\| \| '_ \ / _` \|
10	\| \|___\| \| \| \| (_\| \| \| \| \| \| __/ __/ \| \| \| \| \| \| (_\| \|
11	\|_____\|_\| \|_\|\__, \|_\|_\| \|_\|\___\|\___\|_\| \|_\|_\| \|_\|\__, \|
12	\|___/ \|___/
13	____ ___ _ ____
14	\| _ \ / _ \ / \|___ \
15	\| \|_) \| \| \| \|_____\| \| __) \|
16	\| __/\| \|_\| \|_____\| \|/ __/
17	\|_\| \___/ \|_\|_____\|
18
19	- the worlds smallest drum computer -
20
21
22
23
24	o==========o
25	\| CONTENTS \|
26	o==========o
27
28	SUMMARY
29
30	PART A. GENERAL
31	1. The screen
32	2. Knobs and buttons
33	3. Table of sounds and effects
34	4. Auto power off (APO)
35	5. Battery status
36	6. Volume
37	7. Factory reset
38
39	PART B. OPERATION
40	1. Getting started
41	a. Set clock
42	b. Set alarm
43	2. Play
44	a. Try sounds out
45	b. Select pattern
46	c. Press "Play"
47	3. Step recording
48	a. Optionally: clear pattern
49	b. Select a sound
50	c. Set sound parameters
51	d. Create the sequence
52	e. Change parameters afterwards
53	4. Live recording
54	a. Quantizer
55	b. Step multiplier (flam)
56	5. Tweak the sound
57	a. Effects
58	b. Parameter locking (motion recording)
59	c. Swing and tempo (BPM)
60	6. Making a song
61	a. Copy pattern
62	b. Clear pattern
63	c. Chain patterns to a song
64
65	PART C. SYNC
66
67	PART D. TIPS, HINTS QUIRKS AND BUGS
68
69
70
71
72
73	o=========o
74	\| SUMMARY \|
75	o=========o
76
77	1. Clear pattern: Function + Pattern.
78
79	2. Press Write.
80
81	3. Choose instrument: Sound + number.
82
83	4. Parameters: set sample speed (A) and LP filter (B).
84
85	5. Set sequence for instrument 1.
86
87	6. Set parameters differently and program rest of sequence for instrument 1.
88
89	7. Motion recording: select instrument and press play. Hold write and turn A or B (this is handy for "synth" sounds 15 and 16).
90
91	8. Flam: select an instrument and while playing press and hold a number (to select a step). Press "BPM" to insert the flam.
92
93	9. Effect: while playing hold FX and press a number. Use distortion (nr. 2) for snappy snare drum.
94
95	10. Song mode: press and hold Pattern and select patterns.
96
97
98
99
100
101
102
103
104	o=================o
105	\| PART A. GENERAL \|
106	o=================o
107
108	Clear a pattern: press "Function" + "Pattern".
109
110	A-1 The screen
111	~~~~~~~~~~~~~~
112	The screen displays the following in its own quirky way:
113
114	- Selected tempo (numerical, upper right): AM/PM flickers in the beat when sync'ed
115	- Time (= clock & alarm)/node/additional info (also upper right)
116	- Sound parameters A and B (in the form of two spools, right hand side)
117	- Sync: icon of a needle on the left hand side
118	- Play/rec mode: [>] indicates play; [o] indicates write mode is active
119	- The pattern (or: sequence) currently playing is the pattern that the sewing machine currently
120	sews. The 16 different patterns are indicated graphically as follows (or simply keep the Pattern
121	button pressed to see its number light up):
122
123	1. /\/\/\/\/\/\/\ 2. / / / / /
124	\/\/\/\/\/\/\/ / / / /
125
126	3. /_\|/_\|/_\|/_\|/_\| 4. __ __ __ __ __
127	\/ \/ \/ \/ \/
128	¯¯ ¯¯ ¯¯ ¯¯ ¯¯
129	5. etc.
130
131	- When a pattern repeats a "wave" goes through the pattern.
132	- When the sequencer changes from one pattern to another then the spool of the sewing machine moves from left to right and a different pattern is displayed afterwards.
133	- The drummer. A rough indication as to which instrument's step is played is given by the drummer. For instance: he stomps on a pedal when the kick drum is played. A hand clap indicated the clap or the sticks. When he hits the pot on the ground a low or high tom is played. Hi-hats are indicated by him rining the bell. Notice that the light of a sound played also light up when a pattern is played.
134	- Sound & sound parameters. When one keeps the Sound button pressed (shortly) the currently selected sound (for instance sound number 2 for the snare drum) is indicated in the numerical part of the screen (upper right corner). It shows a one and a dash followed by the number of the sound (for instance: 1-02 for the snare). Keep "Sound" pressed and press the number of a sound to change instrument. The parameters A & B set for that sound/instrument are represented by the thread spools above the A & B knobs.
135	- The icon of the button w/ four holes: if it lights up then the step played has flam (step multiplier) activated on it. See B-4b.
136	- Spark of the needle. When an effect (FX) has been applied to a step in a sequence that is playing then the needle sparks.
137	- The dashes at the bottom are constantly on (possible bug, see part D).
138	- The numbers 2, 4, 8 16 next tot the icon of a button w/ four holes (on the left hand side) never show. Possible bug, see part D.
139
140
141	A-2 Knobs and buttons
142	~~~~~~~~~~~~~~~~~~~~~
143	- Sound (hold and press 1-16)
144	- Pattern (hold and press 1-16)
145	- BPM (press to select tempo w/ knob B, hold to set master volume 1-16, hold
146	step 1-16 + M to set multiplier)
147	- Knobs A/B
148	- Function
149	- FX (hold and press 1-16)
150	- Play (/stop)
151	- Write
152
153
154	A-3 Table of sounds and effects
155	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
156	While playing, hold "FX" and press any key 1-16 to punch-in effects.
157
158	Table 1. Instruments sounds and effects.
159	____________________________________________
160
161	Sounds
162	____________________________________________
163	1. bass drum 9. hand clap
164	2. snare drum 10. click
165	3. closed hi-hat 11. low tom
166	4. open hi-hat 12. hi tom
167	5. synthesized snare 13. cow bell
168	6. sticks 14. blip
169	7. cymbal 15. tone
170	8. noise 16. bass tone
171	_____________________________________________
172
173	Effects
174	_____________________________________________
175	1. low sample rate 9. stutter 4
176	2. distortion 10. stutter 3
177	3. bit crush 11. repeat 8
178	4. delay (echo) 12. repeat 6
179	5. lowpass filter 13. note shuffle
180	6. lowpass sweep 14. feedback
181	7. hipass filter 15. parameter lfo
182	8. hipass sweep 16. vibrato
183	_____________________________________________
184
185	Interesting effects: 1 (low sample r.) and 2 (distortion, for snare dr.). The echo/delay (nr. 4) is a bit too much.
186
187
188	A-4 Auto power off (APO)
189	~~~~~~~~~~~~~~~~~~~~~~~~
190	The unit auto powers off after 5 minutes of inactivity. In this state all patterns and settings will be saved, leaving only the LCD lit (lights go off). This state draws very little power so there is no need to remove batteries. If there is a cable connected in the line in, the unit will auto power off after 60 minutes of inactivity. Press any key to wake the unit after sleep (lights go on).
191
192	After going into standby mode settings/sequences etc. are permanently stored. Even when batteries are changed!
193
194
195	A-5 Battery status
196	~~~~~~~~~~~~~~~~~~
197	Press sound + BPM to show battery status. Its in the numerical part of the display.
198
199
200	A-6 Volume
201	~~~~~~~~~~
202	Hold "BPM" and press any key 1-16 to adjust master volume. Note: if a headphone or speaker is connected to the PO-12 then its volume is set down to 5. When the headphone jack is removed then the volume is set back to its high value.
203
204
205	A-7 Factory reset
206	~~~~~~~~~~~~~~~~~
207	Hold Pattern + Write while inserting batteries to restore the unit to factory default. Note: If you have an older software revision this reset functionality is not implemented.
208
209
210	A-8 Knobs A & B
211	~~~~~~~~~~~~~~~
212	It seems that knob A determines how fast the sample of an instrument is played back and that B is a low pass filter. So a long low bass drum (long decay) can be achieved by turning A up (but not too much) and turning B down. A snappy high snare drum is more difficult. The sample may not be too short but when it is long that means that the sample is played back slowly, and thus, not snappy. Filter all the way up.
213
214
215
216
217
218
219	o===================o
220	\| PART B. OPERATION \|
221	o===================o
222
223	B-1 Getting started
224	~~~~~~~~~~~~~~~~~~~~
225	a. Set clock
226	Insert batteries. Set time by turning knob A for hours and knob B for minutes. press any key to confirm and exit. Reset the clock by removing the batteries and start over.
227
228	b. Set alarm
229	Press Sound + Pattern. Set alarm clock by turning A for hours and B for minutes. (disable alarm by turning knob A all the way down). Press key 1-16 to set pattern for the alarm.
230
231
232	B-2 Play
233	~~~~~~~~
234	a. Try sounds out
235	When neither the play or rec mode is selected (see LCD screen) one can push buttons 1 to 16 to hear its sound. The parameters of the sound can be altered by turning knobs A and B. Beware: when one pushes the button of a sound multiple times quickly then the parameters of the sound are (re)set to those seen on the display (i.e. the two spools).
236
237	b. Select pattern
238	Hold the Pattern button and press any key from 1-16 to select a pattern. Blinking led indicates active pattern
239
240	c. Press "Play"
241	Press play to start playing, press again to stop. Watch the 16 step sequencer move from step to step (the steps light up). The button number of the sound played blinks for a short time too.
242
243
244	B-3 Step recording
245	~~~~~~~~~~~~~~~~~~
246	To choose a pattern: press "Pattern" + number.
247
248	a. Optionally: clear pattern
249	Press "Function" + "Pattern".
250
251	b. Select a sound
252	Hold the Sound button and press a key from 1-16.
253
254	c. Set sound parameters
255	Before entering a note into the sequencer one may alter the sound w/ knobs A & B. The values for parameter A & B which are set for that instrument are represented by the thread spools above the A & B knobs. They are saved into memory along w/ the sequence. For the bass drum parameter A sounds like pitch and B like decay (compare to a Roland TR-808).
256
257	d. Create the sequence
258	Press "Write" (the rec symbol will be shown on the LCD screen). Enter sounds/notes in the grid of the sequencer. Press "Sound + number" to select another instrument. Press play to listen to your pattern. The sequence is automatically saved when the PO-12 is not operated for 5 minutes (and goes in to standby mode).
259
260	e. Change parameters afterwards
261	To change an instrument's parameters, activate the instrument (press Sound + instrument number) turn knobs A & B and re-enter the sequence for that instrument (see also B-5b Parameter locking).
262
263
264	B-4 Live recording
265	~~~~~~~~~~~~~~~~~~
266	a. Quantizer
267	While playing, hold "Write" and press any key 1-16 to punch in notes. Notes will be quantized along with current swing setting. release write when finished. Beware! All parameters (i.e knob A & B) that you've set during step recording are reset.
268
269	b. Flam (step multiplier)
270	- Select a sound (i.e. instrument) w/ "Sound" + number key.
271	- While playing, press and hold a number key to select a step.
272	- Press "BPM/M" to insert a re-trig (flam) on that step.
273	- Press "BPM/M" multiple times to switch between 2, 4, 8, 16 or 0 flams (four times).
274
275	When flam is active the icon of a button w/ four holes on the left side blinks when the "flammed" step is played. Probably the number of flams should have had to appear next to the button icon (the numbers 2, 4, 8, and 16 are there), but has been forgotten to be implemented during development (also see part D). It is now very difficult to see how many times you should press "BPM" to get rid of the flam, if you can even find out on which instrument it has been activated and on which step. So use w/ care!
276
277
278	B-5 Tweak the sound
279	~~~~~~~~~~~~~~~~~~~
280	a. Effects
281	- See table 1 in section A-3. While playing, press and hold the number key of the desired effect. Then press FX to punch-in the effect. If an effect is applied to a certain step in the sequence then the needle of the sewing machine sparks. You cannot see what effect was applied. You can apply more that one effect on one step.
282	- If an effect is applied on a two steps in a row then the left spark shows first and then the right. If an effect is only applied to an isolated step then only the left spark shows.
283	- Hold FX without pressing any key to clear effects. You can clear all effects on all steps or all effects that were applied on one step (time carefully!). You can not clear one effect: only all.
284	- If you deactivate a step then the effect is not deactivated.
285
286	b. Parameter locking (motion recording)
287	- Select an instrument (Sound + number) and press play.
288	- Hold write while turning knob A or B to write sound parameter changes over time.
289	- Does this only affect the selected instrument?
290
291	c. Swing and tempo (BPM)
292	Hold "BPM" and turn A to adjust the swing or B to adjust the tempo (BPM). The amount of BPM is shown in the numerical part of he display in the upper right hand corner.
293
294
295	B-6 Making a song
296	~~~~~~~~~~~~~~~~~
297	a. Copy pattern
298	Hold "Write" + "Pattern" and press 1-16 to paste the active pattern to the corresponding new slot.
299
300	b. Clear pattern
301	If needed: press Function + Pattern.
302
303	c. Chain patterns to a song
304	Press and hold "Pattern" and select which patterns (1 - 16) to chain by pressing its corresponding number. Up to 16 patterns can be chained. A pattern can be selected multiple times. Example: 1,1,1,4 plays pattern 1 three times then moves on to pattern 4. After last pattern is played the sequence will start over again. A song is not saved. Check the patterns to be played (and thus if you are in song mode) by holding down Pattern. That will make the patterns in a song light up and the first one blinks.
305
306
307
308
309
310	o==============o
311	\| PART C. SYNC \|
312	o==============o
313
314	When the PO-12 is synched with another machine then the icon of a needle is shown on the left hand side of the display.
315
316	Table 2. Sync modes.
317	_________________________________________
318	ID Input Output
319	_________________________________________
320	SY0 stereo stereo
321	SY1 stereo mono/sync
322	SY2 sync stereo
323	SY3 sync mono/sync
324	SY4 mono/sync stereo
325	SY5 mono/sync mono/sync
326	_________________________________________
327
328	It is possible to sync the OP-12 with a click track using line in and out. Warning: sync levels should not exceed 5 Vpp (Volt peak-to-peak). Connect a standard stereo audio cable between the units. The master unit will control the tempo of the slave unit.
329
330	Hold Function and press BPM on to toggle between sync modes. Press repeatedly to toggle between different modes. There are 5 sync modes. Default mode is SY0. When sync is used the signal will be split between audio (right) and sync (left).
331
332	To sync a synth and the OP-12 choose mode SY2. This is not saved: one must press "Function" + "BPM" every time when the PO-12 is synced.
333
334
335
336
337	o=====================================o
338	\| PART D. TIPS, HINTS QUIRKS AND BUGS \|
339	o=====================================o
340
341	D-1. Want to see the parameters (A & B) that you've set for a particular instrument in a sequence? Select that sound ("Sound" + number) and it is displayed on the thread spools A & B during play.
342
343	D-2. The numbers 2, 4 ,8 and 16 next to the flam indicator (i.e. the step multiplier: the icon of a button w/ four holes) do never show AFAIK. Considering the fact that flam can take the value of those numbers it might have been an error during the development of the device, that is: they should have shown up in combination w/ flam.
344
345	D-3. Some units show the number of flams (i.e. step multiplier) in the clock section of the screen when flam is applied. What is shown is "t-2", "t-4", etc. Mine does not show this. Different firmwares?
346
347	D-4. On the bottom of the LCD display there are 16 dashes. Considering the fact that 16 sequences can be chained to form a song those dashes might have been meant to indicate the position of a selected pattern in a song. It might have have been the intention to have them lit up when the Pattern button is pressed in song mode. Currently only the pattern number of the song that is currently playing blinks. Possibly another error during development of the device.
348
349	D-5. If battery power is low (95% - 80%) then the PO-12 crashes if the volume is set high. However, the PO-12 is quite sturdy: I've dropped it from small hights without it resetting.